Placing Calls to Contacts
To place a call to a contact from the local directory:
•
Tap
.
•
If the contact was added to a specified contact group, you can tap the contact group first, and then do one
of the following:
•
Tap the desired contact.
•
If only one number for the contact is stored in the local directory, the IP phone will dial out the
number.
•
If multiple numbers for the contact are stored in the local directory, tap the desired number to dial
out.
•
Tap
after the desired contact.
•
If only one number for the contact is stored in the local directory, tap Send to dial out the number.
•
If multiple numbers for the contact are stored in the local directory, tap Send to display all numbers.
•
Tap the desired number to dial out.
Matrix SPARSH VP710 User Guide
177