•
Tap
to accept the change or
You can configure a static IPv4 address for the IP phone. Before configuring it, make sure that the IP
mode is configured as IPv4 or IPv4 & IPv6.
To configure a static IPv4 address via phone user interface:
•
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
•
Tap Settings->Advanced (default password: admin) ->Network->WAN Port->IPv4.
•
Tap the Type field.
•
Tap Static IP in the pop-up dialog box.
•
Enter the desired value in the IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS
field respectively.
•
Tap
to save the change or
You can configure a static IPv4 address for the IP phone. Before configuring it, make sure that the IP
mode is configured as IPv4 or IPv4 & IPv6.
To configure a static IPv6 address via phone user interface:
•
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
•
Tap Settings->Advanced (default password: admin) ->Network->WAN Port->IPv6.
•
Tap the Type field.
•
Tap Static IP in the pop-up dialog box.
70
to cancel.
to cancel.
Matrix SPARSH VP710 User Guide