•
In the CA Certificates field, click Browse to select and Upload the desired CA certificate(*.pem,
*.crt, *.cer or *.der) from your local system.
•
Click Confirm to save the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
•
Click OK to reboot the IP phone.
To configure the 802.1X authentication via phone user interface:
•
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
•
Tap Settings->Advanced (default password: admin) ->Network->802.1x.
•
Tap the 802.1x Mode field
•
If you select EAP-MD5:
•
Enter the username for authentication in the Identity field.
•
Enter the password for authentication in the MD5 Password field.
•
If you select EAP-TLS:
•
Enter the username for authentication in the Identity field.
•
Leave the MD5 Password field blank.
•
If you select EAP-PEAP/MSCHAPv2:
•
Enter the user name for authentication in the Identity field.
•
Enter the password for authentication in the MD5 Password field.
•
If you select EAP-TTLS/EAP-MSCHAPv2:
•
Enter the username for authentication in the Identity field.
•
Enter the password for authentication in the MD5 Password field.
•
If you select EAP-PEAP/GTC:
•
Enter the username for authentication in the Identity field.
•
Enter the password for authentication in the MD5 Password field.
Matrix SPARSH VP710 User Guide
663