Table of Contents
Advertisement
•
Reset non-static settings: All non-static settings on the phone will be reset. After resetting the non-static
settings, the IP phone will perform the auto provisioning process immediately.
•
Reset static settings: All static settings on the phone will be reset.
•
Reset userdata & local config: All the local cache data (e.g., userdata, history, directory) will be cleared.
And all configurations saved in the <MAC>-local.cfg configuration file on the IP phone will be reset.
•
Reset to factory Setting: All configurations on the phone will be reset.
•
Reset build-in SD card: All the files in the internal SD card will be cleared.
You can reset the IP phone to default factory configurations. The default factory configurations are the settings that
reside on the IP phone after it has left the factory. You can also reset the IP phone to custom factory configurations
if required. The custom factory configurations are the settings that defined by the user to keep some custom
settings after resetting.
The Reset local settings/Reset non-static settings/Reset static settings/Reset userdata & local config
option on the web user interface appears only if the value of the parameter
static.auto_provision.custom.protect" is set to 1.
How to reset the IP phone to default factory configurations?
To reset the IP phone via web user interface:
•
Click on Settings->Upgrade.
The web user interface prompts the message "Do you want to reset to factory?".
•
Click OK to confirm the resetting.
The IP phone will be reset to factory successfully after startup.
How to reset internal SD card to factory?
To reset the internal SD card to factory:
•
Click on Settings->Upgrade.
•
Click Reset build-in SD card in the Reset build-in SD card field.
The web user interface prompts the message "Reset build-in SD card to factory?".
•
Click OK to confirm the resetting.
And all the data (e.g., pictures, audio and video files) in the internal will be cleared if you reset
the internal SD card.
Rebooting Issues
How to reboot the IP phone remotely?
IP phones support remote reboot by a SIP NOTIFY message with "Event: check-sync" header. Whether the IP
phone reboots or not depends on the value of the parameter "sip.notify_reboot_enable". If the value is set to 1, or
the value is set to 0 and the header of the SIP NOTIFY message contains an additional string "reboot=true", the IP
phone will reboot immediately.
The NOTIFY message is formed as shown:
Matrix SPARSH VP710 User Guide
741
Advertisement
Table of Contents
