Table of Contents
Advertisement
•
Tap Connect to connect to the wireless network.
Once the connection has completed successfully, the prompt "Connected" appears under the
corresponding SSID.
You can also swipe down from the top of the screen to enter the control center, and toggle Wi-Fi on. The
phone will automatically search for wireless network in your area, and try to connect the wireless network
that you have connected last time. If there are no available wireless networks or the phone cannot connect
the wireless network that you have connected last time, you will get a notification "Wi-Fi networks
available". Swipe down from the top of the screen to enter the notification center, tap the notification.
Repeat the above steps to connect to the desired wireless network.
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless networks. WPS can
automatically configure a wireless network with a network name (SSID) and strong WPA data encryption and
authentication.
Two methods supported by the IP phone in the Wi-Fi protected setup:
•
Push Button Configuration (PBC): The user simply has to push the WPS key on both the IP phone and
gateway/router to connect.
•
Personal Identification Number (PIN): The user has to enter a WPS PIN generated randomly by the IP
phone on the gateway/router to connect.
Push Button Configuration (PBC)
To connect to the wireless network using PBC method via phone user interface:
•
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
•
Tap Settings->Basic->Wi-Fi.
•
Tap the On radio box in the Wi-Fi field.
The phone will automatically search for available wireless networks in your area.
76
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
