Matrix SPARSH VP710 User Manual page 833

Parameter-
account.X.display_mwi.enable
(X ranges from 1 to 16)
Description
Default Value
Value
Example
Multicast Paging
Sending RTP Stream
Parameter-
multicast.codec
Description
Default Value
Range
Example
Parameter-
multicast.paging_address.X.ip_address
(X ranges from 1 to 31)
Matrix SPARSH VP710 User Guide
Configuration File
<MAC>.cfg
Enables or disables the IP phone to present audio
and visual MWI when receiving new voice
messages.
Note: It always works at the time of Unsolicited
MWI; at the time of solicited MWI, MWI
subscription feature should be configured in
advance. To present audio MWI, you also need
to set the value of the parameter
"features.voice_mail_tone_enable" to 1 (Enabled)
in advance.
1
0-Disabled
1-Enabled
account.1.display_mwi.enable= 1
Configuration File
<MAC>.cfg
Configures the codec of multicast paging.
G722
PCMU
PCMA
G729
G722
multicast.codec = G722
Configuration File
<MAC>.cfg
825