Matrix SPARSH VP710 User Manual page 887

Description
Range
Default Value
Example
Parameter-
phone_setting.backlight_time
Description
Range
Default Value
Example
Bluetooth
Parameter-
features.bluetooth_enable
Description
Range
Default Value
Example
Parameter-
features.bluetooth_adapter_name
Matrix SPARSH VP710 User Guide
Configures the intensity of the touch screen when the
phone is active. 10 is the highest intensity.
It configures the LCD's intensity of the IP phone.
1 to 10
8
phone_setting.active_backlight_level = 8
Configuration File
<MAC>.cfg
Configures the delay time (in seconds) before the
backlight is turned off when the IP phone is inactive.
0, 15, 30, 60, 120, 300, 600 or 1800
If it is set to 0 (Always On), the backlight will not be
turned off when the IP phone is inactive.
If it is set to 60 (60), the backlight will be turned off when
the IP phone is inactivated for 60 seconds.
0
phone_setting.backlight_time = 0
Configuration File
<MAC>.cfg
Triggers Bluetooth mode to on or off.
0-Off
1-On
Note: To use a Bluetooth headset or connect a Bluetooth
device, you must trigger Bluetooth mode to on.
0
features.bluetooth_enable = 0
Configuration File
<MAC>.cfg
879