Matrix SPARSH VP710 User Manual page 906

CDP
Parameter-
static.network.cdp.enable
Description
Range
Default
Example
Parameter-
static.network.cdp.packet_interval
Description
Range
Default
Example
VPN (Virtual Private network)
Parameter-
static.network.vpn_enable
Description
898
Configuration File
<MAC>.cfg
Enables or disables the CDP (Cisco Discovery Protocol)
feature on the IP phone.
If it is set to 1 (Enabled), the IP phone will attempt to
determine its VLAN ID through CDP.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
0-Disabled
1-Enabled
0
static.network.cdp.enable = 0
Configuration File
<MAC>.cfg
Configures the interval (in seconds) for the IP phone to
send the CDP (Cisco Discovery Protocol) request.
Note: It works only if the value of the parameter
"static.network.cdp.enable" is set to 1 (Enabled). If you
change this parameter, the IP phone will reboot to make
the change take effect.
Integer from 1 to 3600
60
static.network.cdp.packet_interval = 60
Configuration File
<MAC>.cfg
Enables or disables OpenVPN feature on the IP phone.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
Matrix SPARSH VP710 User Guide