Table of Contents
Advertisement
Default Value
Range
Example
Parameter-
account.X.naptr_build
(X ranges from 1 to 16)
Description
Default Value
Range
Example
Allow IP call
Parameter-
features.direct_ip_call_enable
Description
Default Value
Range
Example
852
0
Valid values are:
0-UDP
1-TCP
2-TLS
3-DNS-NAPTR
account.1.sip_server.1.transport_type = 0
Configuration File
<MAC>.cfg
Configures the way of SRV query for the IP phone
to be performed when no result is returned from
NAPTR query for account X.
0 - SRV query using UDP only
1 - SRV query using UDP, TCP and TLS1.
0
0 - SRV query using UDP only
1 - SRV query using UDP, TCP and TLS1.
account.1.naptr_build= 0
Configuration File
<MAC>.cfg
Enables or disables allow IP address call.
Note: If you want to receive an IP address call,
make sure the value of the parameter
"sip.trust_ctrl" is set to 0 (Disabled).
1
0 - Disabled
1 - Enabled
features.direct_ip_call_enable= 1
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
