Table of Contents
Advertisement
•
Select the desired channel from the Channel list.
Click Confirm to save the change.
•
The priorities of listening addresses are predefined: 1 with the highest priority, 31 with the lowest.
•
The phone plays a warning tone when receiving incoming multicast paging calls.
•
The phone will not receive a new incoming multicast paging call when there are two calls on the phone.
•
Multicast listening addresses is configurable via web user interface only.
Using Multicast Paging
To send RTP stream via a multicast paging key when the receiver's phone is idle:
•
Tap the multicast paging key when the phone is idle.
The phone sends RTP to a preconfigured multicast address (IP: Port).Both the sender's and receiver's
phones play a warning tone and the receiver automatically answers the multicast RTP session in the
hands-free (speakerphone) mode.The multicast paging key icon will become
The following figure shows a multicast RTP session on the IP phone:
578
and solid.
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
