Matrix SPARSH VP710 User Manual page 48

Smart video ip deskphone

Hide thumbs Also See for SPARSH VP710:

Table of Contents

Downloading the Configuration Files

Once obtaining a provisioning server address in one of the ways introduced above, the phone will connect to the

provisioning server and download configuration files. During the auto provisioning process, the phone will try to

download the MAC-Oriented CFG file related to it from the provisioning server. If resource files need to be updated

and the access URLs have been specified in configuration files, the phone will then try to download and update the

resource files.

Resolving and Updating Configurations

After downloading, the phone resolves the configuration files, downloads the resource files requested in the

configuration files, and then updates the configurations and resource files to the phone flash. Generally, updated

configurations will automatically take effect after the auto provisioning process is completed. For update of some

specific configurations which require a reboot before taking effect, for example, network configurations, the phone

will reboot to make the configurations effective after the auto provisioning process is completed.

The phone calculates the MD5 values of the downloaded files. If the MD5 values of the Common and MAC-

Oriented configuration files are the same as those of the last downloaded configuration files, this means these two

configuration files on the provisioning server are not changed. The phone will complete the auto provisioning

without repeated update. This is used to avoid unnecessary restart and impact of phone usage. If configuration files

have been AES-encrypted, the phone will decrypt them after downloading the configuration files.

The update mode is used to set the desired time for the phone to perform the auto provisioning process.

Let us understand the following update modes in detail:

Auto Provision Now

Multi-mode Mixed

SIP NOTIFY Message

The phone performs the auto provisioning process when the phone is powered on.

To activate the Power On mode via a web user interface:

Click on Settings->Auto Provision.

Matrix SPARSH VP710 User Guide