Matrix SPARSH VP710 User Manual page 945

Example
Parameter-
account.X.outbound_proxy_enable
(X ranges from 1 to 16)
Description
Default Value
Range
Example
Parameter-
account.X.outbound_proxy.Y.addres
s
(X ranges from 1 to 16, Y ranges from
1 to 2)
Description
Default Value
Range
Example
Parameter-
account.X.outbound_proxy.Y.port
(X ranges from 1 to 16, Y ranges from
1 to 2)
Matrix SPARSH VP710 User Guide
account.1.sip_server.1.port = 5060
Note: If the value of this parameter is set to 0, the port
used depends on the value specified by the parameter
"account.X.sip_server.Y.transport_type".
Configuration File
<MAC>.cfg
Configures the port of the SIP server Y that specifies
registrations for account X.
0
0-Disabled
1-Enabled
NA
Configuration File
<MAC>.cfg
Configures the port of the SIP server Y that specifies
registrations for account X.
Blank
IP address or domain name
account.1.outbound_proxy.1.address = 10.1.8.11
Note: It works only if the value of the parameter
"account.X.outbound_proxy_enable" is set to 1
(Enabled).
Configuration File
<MAC>.cfg
937