Table of Contents
Advertisement
Example
Parameter-
phone_setting.talk_and_dial_power_le
d_enable
Description
Format
Default Value
Range
Example
Web Server Type
Parameter-
static.wui.http_enable
Description
Default Value
Range
Example
Parameter-
static.network.port.http
768
phone_setting.hold_and_held_power_led_flash_ena
ble = 0
Configuration File
<MAC>.cfg
Enables or disables the power indicator LED to be
turned on when the phone is busy.
If it is set to 0, the status of the power indicator LED is
determined by the value of the parameter
"phone_setting.common_power_led_enable".
Boolean
0
Valid values are:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid green)
phone_setting.talk_and_dial_power_led_enable = 1
Configuration File
<MAC>.cfg
Enables or disables the user to access web user
interface of the IP phone using the HTTP protocol.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
1
0 or 1
0 - Disabled
1 - Enabled
static.wui.http_enable = 1
Configuration File
<MAC>.cfg
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
