Table of Contents
Advertisement
To configure the time and date format via web user interface:
•
Click on Settings->Time & Date.
•
Select the desired value from the Time Format list.
•
Select the desired value from the Date Format list.
•
Click Confirm to save the change.
To configure the SNTP setting via phone user interface:
•
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
•
Tap Settings->Basic->Time & Date->General.
•
Tap the Type field.
•
Tap SNTP Settings in the pop-up dialog box.
•
Tap the Time Zone field.
•
Tap the time zone that applies to your area in the pop-up dialog box. The default time zone is "+8".
•
Enter the domain name or IP address of SNTP server in the NTP Server1 and NTP Server2 field
respectively.
•
Tap the Daylight Saving field.
•
Tap the desired value in the pop-up dialog box.
•
Tap the Location field.
This field appears only if Daylight Saving field is selected to Automatic.
•
Tap the desired time zone name in the pop-up dialogbox.
126
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
