Description
Default Value
Range
Example
Parameter-
static.wui.https_enable
Description
Default Value
Range
Example
Parameter-
static.network.port.https
Description
Default Value
Range
Example
Matrix SPARSH VP710 User Guide
Configures the HTTP port for the user to access web
user interface of the IP phone using the HTTP
protocol.
Note: Please take care when choosing an alternate
port. If you change this parameter, the IP phone will
reboot to make the change take effect.
80
1 to 65535
static.network.port.http= 80
Configuration File
<MAC>.cfg
Enables or disables the user to access web user
interface of the IP phone using the HTTPS protocol.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
1
0 or 1
0 - Disabled
1 - Enabled
static.wui.https_enable= 1
Configuration File
<MAC>.cfg
Configures the HTTPS port for the user to access web
user interface of the IP phone using the HTTPS
protocol.
Note: Please take care when choosing an alternate
port. If you change this parameter, the IP phone will
reboot to make the change take effect.
443
1 to 65535
static.network.port.https= 443
769