Procedure
Specify the trusted IP address for action URI using the configuration files or locally.
Configuration File
Local
To configure the trusted IP address(es) for action URI via web user interface:
•
Click on Features->Remote Control.
•
Enter the IP address or any in the Action URI allow IP List field.
Multiple IP addresses are separated by commas. If you enter "any" in this field, the IP phone can receive
Matrix SPARSH VP710 User Guide
<MAC>.cfg
Web User Interface
Configure the IP phone to receive
the action URI requests.
Configure the IP phone to pop up
the Allow Remote Control prompt.
Specify the trusted IP address(es) for
sending the action URI to the IP
phone.
For more information, refer
"Appendix D - Configuration
Parameters".
Specify the trusted IP address(es) for
sending the action URI to the IP
phone.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-remotecon
trl&q=load
503