Matrix SPARSH VP710 User Manual page 921

Range
Example
Administrative Password/User Password
Parameter-
static.security.user_password
Description
Default Value
Range
Example
Key as Send
Parameter-
features.key_as_send
Description
Default Value
Matrix SPARSH VP710 User Guide
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
phone_setting.talk_and_dial_power_led_enable = 0
Configuration File
<MAC>.cfg
Configures the password of the user or administrator
for phone's web user interface access.
The IP phone uses "user" as the default user password
and "admin" as the default administrator password.
The valid value format is username:new password.
user
32 characters
static.security.user_password = user:123 means setting
the password of user (current user name is "user") to
password 123.
static.security.user_password = admin:456 means
setting the password of administrator (current user
name is "admin") to password 456.
Note: IP phones support ASCII characters 32-126(0x20-
0x7E) in passwords. You can set the password to be
empty via web user interface only.
Configuration File
<MAC>.cfg
Configures the "#" or "*" key as the send key.
1
913