Table of Contents
Advertisement
•
Tap the EAP method field.
•
Tap the desired EAP method in the pop-up dialog box.
•
If you select PEAP/TTLS:
•
Tap the Phase-2 authentication field.
•
Tap the desired Phase-2 authentication method in the pop-up dialog box.
•
Enter the identity (username) in the Identity field.
•
Enter the anonymous identity (username) in the Anonymous identity field (to be used as the
unencrypted identity).
•
Enter the password in the Password field.
•
If you select TLS:
•
Enter the username in the Identity field
•
If you select PWD:
•
Enter the username in the Identity field.
•
Enter the password in the Password field.
•
You can do the following:
•
Tap the Show password radio box to make the password visible.
•
Tap the Show advanced options radio box to configure the HTTP proxy for Browser application.
•
Tap Save to accept the change.
Viewing the Connected Wireless Network Information
When the phone is connected to a wireless network, the Wi-Fi
icon indicates the signal strength. The more green arcs you see, the stronger the signal strength is.
To view the connected wireless network information via phone user interface:
•
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
•
Tap Settings->Basic->Wi-Fi.
•
Tap Wireless Status to view the detailed wireless network information (e.g., Profile Name, SSID or Signal
Strength).
80
icon will display on the status bar. The Wi-Fi
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
