Table of Contents
Advertisement
Parameter-
static.network.secondary_dns
Description
Default Value
Range
Example
PPPoE
Parameter-
static.network.internet_port.type
Description
Default Value
Range
Example
Parameter-
static.network.pppoe.user
Description
Default Value
Range
Example
Matrix SPARSH VP710 User Guide
Configuration File
<MAC>.cfg
Configures the secondary IPv4 DNS server.
Note: It works only if the value of the parameter
"static.network.static_dns_enable" is set to 1(On).
If you change this parameter, the IP phone will reboot
to make the change take effect.
Blank
IPv4 Address
static.network.secondary_dns = 202.101.103.54
Configuration File
<MAC>.cfg
Configures the Internet port type.
Note: It works only if the value of the parameter
"static.network.ip_address_mode" is set to
0 (IPv4) or 2 (IPv4 & IPv6). If you change this
parameter, the IP phone will reboot to make
the change take effect.
0
Valid values are:
0-DHCP
1-PPPoE
2-Static IP Address
static.network.internet_port.type = 1
Configuration File
<MAC>.cfg
Configures the PPPoE username when the Internet port
type is configured as PPPoE and the IP address mode is
configured as IPv4 or IPv4&IPv6.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
Blank
String within 32 characters
static.network.pppoe.user = test.matrix
761
Advertisement
Table of Contents
