Table of Contents
Advertisement
To configure two sending multicast addresses via web user interface:
•
Click on Directory->Multicast IP.
•
Enter the sending multicast address and port number in the Paging Address field.
•
Enter the label in the Label field.
The label will appear on the touch screen when sending the RTP multicast.
•
Select the desired channel from the Channel list.
•
Click Confirm to save the change.
To configure a multicast paging key via web user interface:
•
Click on DSSKey->Line Key.
•
In the desired DSS key field, select Multicast Paging from the Type list.
•
Enter the multicast IP address and port number in the Value field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
•
In the Label field (Optional), enter the string that will appear on the touch screen.
•
Enter the desired channel in the Extension field.
•
The valid channel ranges from 0 to 30.
570
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
