Introduction; Purpose Of This Operating Guide; Additional Resources; Document And Software Version - Danfoss VLT FC 280 Operating Manual

VLT® Midi Drive FC 280
Operating Guide

1 Introduction

1.1 Purpose of this Operating Guide

This Operating Guide provides information for safe installation and commissioning of the AC drive. It is intended for use by qualified
personnel.
Read and follow the instructions to use the drive safely and professionally.
Pay particular attention to the safety instructions and general warnings. Always keep this Operating Guide with the drive.
VLT is a registered trademark for Danfoss A/S.
®

1.2 Additional Resources

Other resources are available to understand advanced drive functions, programming and maintenance.
• The VLT® Midi Drive FC 280 Programming Guide provides information on how to program and includes complete parameter
descriptions.
• The VLT® Midi Drive FC 280 Design Guide provides detailed information about the design and applications of the drive.
Supplementary publications and manuals are available from the Danfoss website.

1.3 Document and Software Version

This manual is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this manual is English.
Table 1: Document and Software Version
Edition
AQ381425076031, version 0101

1.4 Product Overview

1.4.1 Intended Use

The drive is an electronic motor controller intended for:
• Regulation of motor speed in response to system feedback or to remote commands from external controllers. A power drive
system consists of the drive, the motor, and equipment driven by the motor.
• System and motor status surveillance.
The drive can also be used for motor overload protection.
Depending on the configuration, the drive can be used in standalone applications or form part of a larger appliance or installation.
The drive is allowed for use in residential, industrial, and commercial environments in accordance with local laws and standards.
In a residential environment, this product can cause radio interference, in which case supplementary mitigation measures can be
required.
Foreseeable misuse
Do not use the drive in applications which are non-compliant with specified operating conditions and environments. Ensure com-
pliance with the conditions specified in chapter Specifications.
Danfoss A/S © 2022.02
Remarks
First edition.
N O T I C E
Introduction
Software version
2.0
AQ381425076031en-000101 / 130R1223 | 9