Danfoss VLT FC 280 Operating Manual page 81

VLT® Midi Drive FC 280
Operating Guide
14. The safety option customization is now complete. A reset may be required depending on the safety option configuration.
6.7.1.3 Password Protection
Use a password to protect the system configuration. A password must be entered only when changing safety option parameters
(writing to option).
The default password is 12345678.
It is advised to change the safety option default password before downloading the parameter values of a safety option with factory
settings. Only persons knowing the password can change the safety option parameter values.
Any misuse of the password may lead to safety issues.
No password is required to access the commissioning parameters of the safety option. The password is required when writing the
parameters to the option via the Write to Drive feature.
The password must consist of 8 characters and is case-sensitive. Alphanumeric characters and symbols are also valid for the pass-
word. Use the Change Password menu item to change the safety option parameter password.
6.7.1.3.1 Resetting the Password
If the password is forgotten, the password can be reset using MCT 10.
Resetting the password resets all option parameters to factory default.
Procedure
1.
In MCT 10, click Administration.
2.
In the Reset tab, select Yes, I want to reset Safety Option configuration in the drive.
3. Enter the default password (12345678).
4.
Click Reset.
5. On the prompt that appears, click Yes.
6. Change the safety option password.
Danfoss A/S © 2022.02
N O T I C E
N O T I C E
N O T I C E
Safety Functions
AQ381425076031en-000101 / 130R1223 | 81