Continuous Parameters - Danfoss VLT FC 280 Operating Manual

VLT® Midi Drive FC 280
Operating Guide

5.3.5.2 Continuous Parameters

Setup 1
OK
1
Setup 1
2 x
2
OK
+
Setup 1
OK 3
Setup 1
4
Setup 1
5
Setup 1
6
Setup 1
7
Setup 1
8
Setup 1
Illustration 26: Main Menu Interactions - Continuous Parameters
Table 10: Changing Values in Continuous Parameters
1 [OK]: The first parameter in the group is shown.
2 Press [▿] repeatedly to move down to the parameter.
3 Press [OK] to start editing.
4 [▹]: First digit flashing (can be edited).
5 [▹]: Second digit flashing (can be edited).
6 [▹]: Third digit flashing (can be edited).
7 [▿]: Decreases the parameter value, the decimal point changes automatically.
40 | Danfoss A/S © 2022.02
12
11
10
9
OK
Commissioning
AQ381425076031en-000101 / 130R1223