Danfoss VLT FC 280 Operating Manual page 87

VLT® Midi Drive FC 280
Operating Guide
Message
0 RPM None
1(1)
Safety Password
Please enter the safety
Password
0 0000000
0 RPM None
1(1)
Pa
0-
Password accepted
[0
([1] Enabled)
0 RPM None
1(1)
Pa
0-
Password rejected
[0
([1] Enabled)
0 RPM 0.00A
!1(1)
SO Data Confirmation
Are you sure that you want
to overwrite the safety
parameters including the
level 1 password?
Danfoss A/S © 2022.02
Description
If selecting [VLT:...] and the password protection in parameter 0-69 Password Protection of Safe-
ty Parameters is enabled, enter the correct LCP-copy/parameter mismatch password (parameter
0-68 Safety Parameters Password).
If the entered password is correct, this overlay message is shown for some seconds.
If the entered password is wrong, this overlay message is shown for some seconds. Then the
password can be entered again.
Decision box for continuing overwriting the existing data or to abort the procedure.
Safety Functions
AQ381425076031en-000101 / 130R1223 | 87