Test Operation; Jog Operation - Mitsubishi Electric MELSERVO-J3 Series Manual

Hide thumbs Also See for MELSERVO-J3 Series:

Table of Contents

7. MR Configurator

7.7 Test operation

Click "Test" on the menu bar and choose "Jog" on the menu.

Clicking displays the confirmation window for switching to the test operation mode.

Click the "OK" button to display the setting screen of the Jog operation.

During the servo on, the confirmation window indicating that the next operation is in the stop status is

Turn the servo off, confirm that the operation is in the stop status, and click the "OK" button to display the

setting screen for the Jog operation.

When confirming the machine operation in the test operation mode, use the

machine after checking that the safety mechanism such as the forced stop (EMG)

If any operational fault has occurred, stop operation using the forced stop (EMG).

For the program operation, refer to the manual of MR Configurator.

The servo motor will not operate if the forced stop (EMG), forward rotation

stroke end (LSP) and reverse rotation stroke end (LSN) are off. Make

automatic ON setting to turn on these devices or make device setting to

assign them as external input signals and turn on across these signals and

SG. (Refer to section 7.6.)

When an alarm occurs, the JOG operation is automatically canceled.