Mitsubishi Electric MELSERVO-J3 Series Manual page 490

15. COMMUNICATION FUNCTION
(7) Point table/speed data (Command [C][6])
Command Data No.
[C][6] [0][1] to [F][F] Speed data write
(8) Point table/acceleration time constant (Command [C][7])
Command Data No.
[C][7] [0][1] to [F][F] Acceleration time constant write
(9) Point table/deceleration time constant (Command [C][8])
Command Data No.
[C][8] [0][1] to [F][F] Deceleration time constant write
(10) Point table/dwell (Command [C][A])
Command Data No.
[C][A] [0][1] to [F][F] Dwell write
(11) Point table/auxiliary function (Command [C][B])
Command Data No.
[C][B] [0][1] to [F][F] Auxiliary function write
(12) External input signal disable (Command [9][0])
Command Data No.
[9][0] [0][0]
[9][0] [0][3]
[9][0] [1][0]
[9][0] [1][3]
(13) Operation mode selection (Command [8][B])
Command Data No.
[8] [B] [0] [0]
Description
The decimal equivalent of the data No. value
(hexadecimal) corresponds to the Point table No.
Description
The decimal equivalent of the data No. value
(hexadecimal) corresponds to the Point table No.
Description
The decimal equivalent of the data No. value
(hexadecimal) corresponds to the Point table No.
Description
The decimal equivalent of the data No. value
(hexadecimal) corresponds to the Point table No.
Description
The decimal equivalent of the data No. value
(hexadecimal) corresponds to the Point table No.
Description
Turns off the input devices, external analog input signals
and pulse train inputs with the exception of EMG, LSP and
LSN, independently of the external ON/OFF statuses.
Disables all output devices (DO).
Enables the disabled input devices (DI), external analog
input signals and pulse train inputs with the exception of
EMG, LSP and LSN.
Enables the disabled output devices (DO).
Description
Operation mode switching
0000: Test operation mode cancel
0001: JOG operation
0002: Positioning operation
0003: Motorless operation
0004: Output signal (DO) forced output
0005: Single-step feed
15 - 15
Setting range
0 to Permissible
instantaneous speed
Setting range
0 to 20000
Setting range
0 to 20000
Setting range
0 to 20000
Setting range
0 to 3
Setting range
1EA5
1EA5
1EA5
1EA5
Setting range
0000 to 0005
Frame length
8
Frame length
8
Frame length
8
Frame length
8
Frame length
8
Frame length
4
4
4
4
Frame length
4