Mitsubishi Electric MELSERVO-J3 Series Manual page 452

14. OPTIONS AND AUXILIARY EQUIPMENT
(3) CC-Link twisted cable
The specifications of the twisted cable usable in CC-Link and the recommended cable are indicated below.
If the cable used is other than the recommended cable indicated in the following table, we cannot guarantee
the performance of CC-Link. For inquiries on CC-Link compatible cables, contact the nearest Mitsubishi
Electric System Service.
Item
Model
Manufacturer
Application
Size
Insulator material
Insulator color
Sheath material
Sheath color
Operating temperature range (Note)
Tensile strength
Minimum bend radius
Outline dimension
Approximate mass
Conductor resistance (20 )
Characteristic impedance
Applicable specification
Note. An upper limit of the operating temperature range shows a heat-resistant temperature of the cable material.
In high-temperature environment, the transmittable distance may be reduced.
POINT
For the cables other than the one indicated here, refer to the open field
network CC-Link catalog (L(NA)74108143).
Specifications
FANC-110SBH
Kuramo Electric
For fixed parts
20AWG 3
Polyethylene foam
Blue, white, and yellow
Oil resistant vinyl
Brown
0 to 75 (32 to 167 )
49N
35mm
Approx. 7.6mm
70kg/km
34.5 /km or lower
110 15
UL AWM Style 2464
CAN/CSA-C22.2
No.210.2-M90(cUL)
14 - 67
Sheath
Braided screen
Tape
Insulator
Conductor
Inclusion
Ground wire
Fig. 14.1 Structure