Mitsubishi Electric MELSERVO-J3 Series Manual page 46

1. FUNCTIONS AND CONFIGURATION
(2) For MR-J3-11KT(4) to MR-J3-22KT(4)
Removal of the front cover
c)
b)
1) Press the removing knob on the lower side of the
front cover ( a) and b) ) and release the installation
hook.
2) Press the removing knob of c) and release the
external hook.
Reinstallation of the front cover
c)
b)
1) Fit the front cover installation hooks on the sockets
of body cover ( a) to d) ) to reinstall it.
Note 1. The cooling fan cover can be locked with enclosed screws (M4
2. By drilling approximately 4 of a hole on the front cover, the front cover can be locked on the body with an enclosed screw (M4
14).
a)
d)
a)
3) Pull it to remove the front cover.
(Note 2)
2) Push the front cover until you hear the clicking
noise of the installation hook.
40).
1 - 25
(Note 1)
(Note 1)
Installation hook