Mitsubishi Electric MELSERVO-J3 Series Manual page 261

6. PARAMETERS
No. Symbol
Position range output address
PC37 *LPPL
Used to set the address increment side position range output address. Set
PC38 *LPPH
the same sign to parameters No.PC37 and PC38. Setting of different signs
will result in a parameter error.
In parameters No.PC37 to PC40, set the range where position range (RXnE)
turns on.
Position range output address
change the value, set in the order of lower digits to upper digits.
PC39 *LNPL Position range output address
Used to set the address decrement side position range output address. Set
PC40 *LNPH
the same sign to parameters No.PC39 and PC40. Setting of different signs
will result in a parameter error.
Position range output address
To change the value, set in the order of lower digits to upper digits.
PC41 For manufacturer setting
PC42 Do not change this value by any means.
PC43
PC44
PC45
PC46
PC47
PC48
PC49
PC50
Name and function
Set address:
Upper 3
Lower 3
digits
digits
is a set of upper digits and lower digits. To
Set address:
Upper 3 Lower 3
digits
digits
is a set of upper digits and lower digits.
Parameter No.PC37
Parameter No.PC38
Parameter No.PC39
Parameter No.PC40
6 - 26
Initial value Unit Setting range
STM
0 10 m
STM
m
0 10
0000h
0000h
0000h
0000h
0000h
0000h
0000h
0000h
0000h
0000h
999999
to
999999
999999
to
999999