Mitsubishi Electric MELSERVO-J3 Series Manual page 615

16. INDEXER POSITIONING OPERATION
(2) Detail list
No. Symbol
PD01 *DIA1 Input signal automatic ON selection 1
Select the input devices to be automatically turned ON.
part is for manufacturer setting. Do not set the value by any means.
For example, to turn ON SON, the setting is "
PD02 For manufacturer setting
Do not change this value by any means.
PD03 Not used in indexer positioning operation.
PD04 Do not change the parameter.
PD05 For manufacturer setting
Do not change this value by any means.
PD06 Not used in indexer positioning operation.
PD07 Do not change the parameter.
PD08
PD09
PD10
PD11
PD12
PD13 For manufacturer setting
Do not change this value by any means.
PD14 Not used in indexer positioning operation.
Do not change the parameter.
PD15 For manufacturer setting
Do not change this value by any means.
PD16 *DIAB Input polarity selection
Used to set the proximity dog input polarity. (Refer to section 5.6.)
0 0
Name and function
0 0
Device name
Forward rotation
stroke end (LSP)
Reverse rotation
stroke end (LSN)
Device name
Forced stop (EMG)
BIN 0: Used as external input signal.
BIN 1: Automatic ON
0
Proximity dog input polarity
0: OFF indicates detection of the dog
1: ON indicates detection of the dog
Initial value
BIN HEX
0
0
0 0
0
Initial value
BIN HEX
0
0
0
0
0
4".
16 - 94
Initial
Unit Setting range
value
0000h Refer to
name and
function
column.
0000h
0000h
0000h
0000h
002Bh
000Ah
000Bh
0002h
0003h
0024h
0C00h
0000h
0800h
0000h
0000h Refer to
name and
function
column.