Mitsubishi Electric MELSERVO-J3 Series Manual page 664

REVISIONS
Print Data *Manual Number
Apr., 2006 SH(NA)030058-A
Jul., 2006 SH(NA)030058-B
Oct., 2007 SH(NA)030058-C
*The manual number is given on the bottom left of the back cover.
First edition
Chapter 2 CAUTION added
Section 3.5.2(2) Description of DB changed
Section 3.5.3 Note deleted
Section 3.6.3(1) On duration: 5ms of RYn1 and RYn2 in diagram modified
Section 3.6.3(2) On duration: 5ms of RYn1 and RYn2 in diagram modified
Section 3.6.3(3) On duration: 5ms of RYn1 and RYn2 in diagram modified
Section 3.7.1 Diagram partly modified
Section 4.8.2(3)(b) Parameter No.19 in diagram changed
Section 4.10.2(2) POINT added
Section 5.6.5(2) NOTE added
Section 5.6.8 POINT changed
Section 5.8(1) Restrictions changed
Section 5.8(5)(a) POINT added
Section 6.2.1 Name of parameter No.PB17: For manufacturer setting
changed
Section 6.2.2 Name of parameter No.PB17: For manufacturer setting
changed
Section 6.3.5 Parameter No.12 in diagram changed
Section 6.4.2 Initial value: 0000h of parameter No. PD20 modified
Sentence of parameter No. PD24 changed
Section 9.3(1)(a) Parameter No. PB07 added
Section 9.5 Section title modified
Section 13.1 Diagrams added
Section 14.1.1 Model: MR-CCN1 of No.33 modified
Section 15.4.1(5) Commands: [3] and [5] added
Section 15.4.2 (15) Group setting (Command [9][F]) added
App 1 Name of parameter No.PB17: For manufacturer setting
changed
Servo amplifier MR-J3-60T4 to MR-J3-22KT4 added
Servo motor HF-SP524/1024/1524/2024/3524/5024/7024
HA-LP6014/701M4 added
Section 1.1.2 Note regarding cooling fan added
Section 1.6.1 Description for "motor power supply connector" changed to
"servo motor power connector"
Section 1.7 Note added with change of notation for power supply
Section 2.1 (1)(b) POINT description changed
Section 4.1 Note regarding stepdown transformer added
Section 4.3.3 (3) Wiring method for MR-J3-200T4 added as (3)
Section 4.3.3 (4) Cable insertion method added for Wago Japan
Section 4.3.3 (5) Cable insertion method for Phoenix Contact Connector
changed
Section 4.11.3 Note regarding circuit breaking method deleted
Section 6.1.4 For parameter No.PA02, setting values 80 to 87 added
Section 7.1 Compatible versions added on table
Section 11.4.2 For descriptions of A10, A30 and A33, MR-J3- T4 added
Section 12.2 Connector type changed for RoHS compatibility
Section 13.1 Diagram layout changed
Revision