Cleaning The Instrument - Thermo Scientific EA IsoLink IRMS System Operating Manual

Cleaning the Instrument

 To clean the instrument
WARNING Cleaning must be performed with the instrument off, the furnaces at room
temperature and the power cord disconnected.
1. Externally clean the instrument with a soap and water solution, or with a household non-abrasive
product. Avoid that any liquid seeps into the instrument.
2. If you just suspect that a substance used for cleaning or a product submitted to analysis has
infiltrated inside the instrument, immediately shut down the instrument and call an authorized
customer support engineer for proper actions.The service engineer must be fully informed on the
nature of the concerned substance.
WARNING It is your responsibility to avoid that dangerous liquids and/or materials seeping inside
the EA IsoLink IRMS System for CNSOH during operation and maintenance.
If you have any doubt about compatibility of decontamination or cleaning agents with parts of the
equipment or with material contained in, please contact your Thermo Fisher Scientific
Representative.
Thermo Scientific EA IsoLink IRMS System for CNSOH Operating Manual
7
Maintenance
Cleaning the Instrument
135