Thermo Scientific EA IsoLink IRMS System Operating Manual page 4

© 2016 Thermo Fisher Scientific Inc. All rights reserved.
Thermo Scientific™ EA IsoLink™ IRMS System for CNSOH, Thermo Scientific™ Isodat™ Software Suite,
EagerSmart™ Data Handling and Thermo Scientific™ AI 1310/AS 1310 Autosamplers are trademarks of
Thermo Fisher Scientific Inc., and its subsidiaries.
Other brand and product names may be trademarks or registered trademarks of their respective companies.
Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the
product operation. This document is copyright protected and any reproduction of the whole or any part of this
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.
The contents of this document are subject to change without notice. All technical information in this
document is for reference purposes only. System configurations and specifications in this document supersede
all previous information received by the purchaser.
Thermo Fisher Scientific Inc. makes no representations that this document is complete, accurate or error-
free and assumes no responsibility and will not be liable for any errors, omissions, damage or loss that
might result from any use of this document, even if the information in the document is followed
properly.
This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of
Sale shall govern all conflicting information between the two documents.
Release history:
Revision A, released October 2016, "Original Instructions"
Revision B, released December 2016
For Research Use Only. Not for use in diagnostic procedures.