Thermo Scientific EA IsoLink IRMS System Operating Manual page 172

9
Running the Flash IRMS as Stand-alone Instrument
Configuring the Analyzer
Figure 150. Instrument Name and Configuration
a. In the field Instrument name, type the instrument serial number (6 digits; for example
b. In the field Analytical Instrument Configuration select Undefined.
c. In the field IRMS & Argon select Instrument control for Flash EA IRMS (NC) and HT.
d. Click OK. The system ask to exit and reboot EagerSmart.
e. At the reboot of EagerSmart, the simplified Main Menu for IRMS is visualized. See
144 EA IsoLink IRMS System for CNSOH Operating Manual
991234). See the label located on the instrument rear panel.
Figure 151.
Figure 151. Main Menu for IRMS
Menus and buttons of the Main Menu for IRMS are described in the following
Table 29 respectively.
Table 28. Main Menu for IRMS: Description of Menus
Menu Description
File Monitors the analysis in real time.
Tools Used when the ashes removal, the
reactor replacement, or both, are
required as maintenance.
Help Accesses to the help system of
EagerSmart.
Sub-menus and Options
• Instrument name and configuration
• View sample being acquired
• Exit EagerSmart
• Ashes removal
• Reactor replacement
• About EagerSmart
Table 28 and
Thermo Scientific