Table of Contents
Advertisement
Installing Flash IRMS Elemental Analyzer
This chapter provides the instruction for installing the Flash IRMS.
Contents
•
•
•
•
•
•
•
Preliminary Information
This chapter contains the preliminary information for installing the EA IsoLink IRMS System for
CNSOH, and for the electrical requirements.
Who Performs the Installation
Your EA IsoLink IRMS System for CNSOH will be installed by an authorized Thermo Fisher
Scientific engineer (FSE), who will verify the instrument operation. If, for any reason, your system is
not installed by a Thermo Fisher Scientific FSE, you should ensure that the following operations are
performed.
Standard Outfit
Use the standard outfit checklist accompanying the instrument to verify that all items have been
received.
Verify Site Preparation
Before installing the EA IsoLink IRMS System for CNSOH, your laboratory must be in compliance
with the guidelines and requirements described in the EA IsoLink IRMS System for CNSOH
Preinstallation Requirements Guide.
Thermo Scientific
Preliminary Information
Making the Gas Supply Plumbing Connections
Electrical Connections
Installing the Reactors into the Furnaces
Setting Pressure and Flow Parameters
Installing Autosampler
Isodat Software Suite
EA IsoLink IRMS System for CNSOH Operating Manual
3
51
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EA IsoLink IRMS System and is the answer not in the manual?
Questions and answers