Thermo Scientific EA IsoLink IRMS System Operating Manual page 108

5
Installing AI 1310/AS 1310 Autosampler
Installing the AI 1310/AS 1310 on the Flash IRMS Elemental Analyzer
 To install the syringe
1. Open the safety door of the turret.
2. Insert the syringe needle into the vial capture device. See
Figure 82. Syringe Installation (1)
80 EA IsoLink IRMS System for CNSOH Operating Manual
Figure
Plunger Head Guide
Flange Guide
Plunger Head
Plunger
Flange
Syringe Body
Syringe Needle
Vial Capture Device
Syringe Body Seat
82.
Thermo Scientific