Start Data Acquisition - Thermo Scientific EA IsoLink IRMS System Operating Manual

4. In the File New dialog box, double-click Sequence. The Sequence Properties window opens, see
Figure
Figure 118. Defining Number of Samples
5. In the Sequence Properties window, enter the Number of Samples, for example, 3.6.
6. Click OK. The sequence grid opens, see
Figure 119. Creating a Sequence for Dual Measurement
7. For each row, enter the Amount of the individual sample, for example 0.260.
8. Enable
9. Select an EA Method, for example Py_iHeM.eam.
10. Edit text in Identifier 1 to identify the sample, for example benzoic acid.
11. Select Method, for example Py_iHeM.
12. Save the sequence with a name of your choice.
13. Continue with

Start Data Acquisition

 To start the data acquisition
1. In the Sequence window, click Start to start the sequence.The Start Sequence window opens, see
Figure
Thermo Scientific
118.
to perform a Peak Center
"Start Data Acquisition"
120.
6
Using EA IsoLink IRMS System for CNSOH
Creating an EA Method for H+O Measurement
Figure 119.
prior to measurement, see
on page 105.
EA IsoLink IRMS System for CNSOH Operating Manual
Figure 119.
105