Usb Hub Control Register 0 (Hcr0) - Freescale Semiconductor MC68HC08KH12 Datasheet

9.4.7 USB HUB Control Register 0 (HCR0)

MC68HC(7)08KH12 Rev. 1.1
—
Freescale Semiconductor
TXDIE — HUB Endpoint 0 Transmit Interrupt Enable
This read/write bit enables the Transmit HUB Endpoint 0 to generate
CPU interrupt requests when the TXDF bit becomes set. Reset clears
the TXDIE bit.
1 = USB interrupt enabled for Transmit HUB Endpoint 0
0 = USB interrupt disabled for Transmit HUB Endpoint 0
RXDIE — HUB Endpoint 0 Receive Interrupt Enable
This read/write bit enables the Receive HUB Endpoint 0 to generate
CPU interrupt requests when the RXDF bit becomes set. Reset clears
the RXDIE bit.
1 = USB interrupt enabled for Receive HUB Endpoint 0
0 = USB interrupt disabled for Receive HUB Endpoint 0
TXDFR — HUB Endpoint 0 Transmit Flag Reset
Writing a logic 1 to this write only bit will clear the TXDF bit if it is set.
Writing a logic 0 to TXDFR has no effect. Reset clears this bit.
RXDFR — HUB Endpoint 0 Receive Flag Reset
Writing a logic 1 to this write only bit will clear the RXDF bit if it is set.
Writing a logic 0 to RXDFR has no effect. Reset clears this bit.
Address: $005B
Bit 7 6
Read:
TSEQ STALL0
Write:
Reset: 0 0
Figure 9-8. USB HUB Control Register 0 (HCR0)
5 4 3
TXE RXE TPSIZ3
0 0 0
2 1 Bit 0
TPSIZ2 TPSIZ1 TPSIZ0
0 0 0
Advance Information
129