Table of Contents
Advertisement
Name and function of your projector
Install battery of remote controller
❶
Open the battery cover.
Please follow the following rules for safety operation:
• Use two of AAA batteries.
!
• Replace both batteries at the same time.
• Do not mix new and old batteries as one pair.
• Keep your remote controller away from water or other liquids.
• Do not expose your remote controller to environments with high
humidity or temperature.
• Do not drop your remote controller.
• In case of any battery solution leaking in the compartment, clear it
thoroughly before placing new batteries in it.
• Using battery of other types than what specified on this manual may
lead to risks of explosion. "Lamp
• Please dispose your old battery by following instructions given in tag
of the battery or local regulations.
Remote controller operation range
Point your remote controller to the IR receiver of
your projector.
Maximum operation range of your remote
controller is about arc 30° and with about an area
of about 8 meters in straight line.
❷
Insert a new battery in it.
Two AAA batteries
Place batteries with its anode
and cathode (+ and -) in correct
direction. Keep both poles in
good connection to the contacts
within the compartment.
replacement"(Page
31
❸
Put the cover back.
99)
8M
8M
30°
30°
30°
30°
8M
8M
30°
30°
30°
30°
Advertisement
Table of Contents
