Transmission Disassembly - Polaris RZR PRO XP 2020 Service Manual

3. The vent line routes toward the driver's side, attaches
to the rear vertical support tube with a hinge clip
and terminates into the support tube using a
t
termination fitting .
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.

TRANSMISSION DISASSEMBLY

r
Refer to the exploded view at the end of this chapter as
1. Place transmission in high gear.
2. Drain and properly dispose of transmission fluid.
3. Remove bell crank nut
e
4. Remove E-clip
and gear selector switch
5. Remove sector cover bolts
6. Remove detent spring, detent pawl and detent star.
Note the master spline on the detent star and the shift
shaft.
TRANSMISSION
NOTICE
a reference.
q w
and bell crank .
retaining the spring washer, washer
r
.
t
and remove the cover.
7
7.11