Polaris RZR PRO XP 2020 Service Manual page 211

8. Remove and clean oil pump pick-up
o
the one bolt .
a
9. Remove the three bolts
to the crankcase.
10. Use one of the oil pump retaining bolts or a pen
magnet to extract the dowel pins
pump. Doing so allows for oil pump removal without
having to remove the pump drive sprocket.
NOTICE
If unable to extract the dowel pins from the oil pump,
the oil pump sprocket must be removed. Access the
sprocket bolt by removing the case plug.
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
i
by removing
s
that retain the oil pump
d
from the oil
ENGINE / COOLING SYSTEM
11. Lift the oil pump drive chain off the sprocket and
remove the oil pump.
12. Visually inspect the oil pump and drive sprocket
wear or damage. Replace oil pump drive chain and
sprocket if worn or damaged. If any part of the oil
pump is damaged, the entire assembly must be
replaced. Replace the oil pump seal
crankcase assembly.
NOTICE
Oil pump assembly is non-serviceable
13. Rotate the engine so the cylinder is facing up.
3
f
for
g
during
3.67