BATTERY REMOVAL
1. Remove the driver's seat to access the battery
2. Disconnect the black (negative) battery cable(s).
3. Disconnect the red (positive) battery cable(s).
CAUTION
To reduce the chance of sparks: Whenever removing
the battery, disconnect the black (negative) cable first.
When reinstalling the battery, install the black (negative)
cable last.
4. Remove the battery hold-down bracket fasteners
and remove the bracket.
5. Lift the battery out of the vehicle.
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
BATTERY INSTALLATION
q
.
Using a new battery that has not been fully charged can
damage the battery, result in a shorter life and hinder
vehicle performance.
1. Ensure the battery is fully charged.
2. Place the battery in the battery holder and secure
with hold-down strap. Torque fasteners to
specification.
Battery Mount Bracket Fasteners:
3. Coat the terminals with dielectric grease or petroleum
jelly.
4. Connect and tighten the red (positive)
first.
5. Connect and tighten the black (negative)
last. Torque terminal fasteners to specification.
w
,
Battery Terminal Fasteners:
6. Verify that cables are properly routed and reinstall the
driver's seat.
ELECTRICAL
CAUTION
TORQUE
53 in-lbs (6 Nm)
q
cable(s)
w
cable(s)
TORQUE
60 in-lbs (7 Nm)
12
12.25