Table of Contents
Advertisement
BRAKE SYSTEM
BRAKE BURNISHING PROCEDURE
It is required that a burnishing procedure be performed
after installation of new brake pads to extend service life
and reduce noise.
Start machine and slowly increase speed to 30 mph.
Gradually apply brakes to stop machine. Allow pads and
disc to cool sufficiently during the procedure. Do not
allow pads or disc to become hot or warping may result.
Repeat this procedure 10 times. Do not make more
than 3 stops per 1 mile (1.6 km).
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
10.34
© Copyright Polaris Industries Inc.
Advertisement
Chapters
Table of Contents
Troubleshooting
