Polaris RZR PRO XP 2020 Service Manual page 352

TRANSMISSION
1. Using the Snorkel Tube Tool and two of the coupler
bolts to hold the coupler, remove the front output
q
shaft coupler nut and washers
Snorkel Tube Tool:
PU-51862
2. Use the snorkel tube tool to remove the snorkel tube
and front output shaft as an assembly.
7.14
3. Extract the snorkel shaft seal
w
.
4. Once the three snap rings
o
by drilling a small pilot hole and threading a screw
in to slowly pull the seal out.
e
Snap Ring
r
Thrust Washer
t
Bearing
y
Ring Gear
u
Front Output Shaft
i
O-Ring
an arbor press to remove the snorkel tube and other
components from the shaft.
CAUTION
Support the end face of the gear teeth when pushing
the shaft through or damage to the gear teeth may
occur.
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
g
from the snorkel tube
o
Snorkel Tube
a
Bearing
s
Snap Ring
d
Thrust Washer
f
Snap Ring
g
Seal
es f
& are removed, use
© Copyright Polaris Industries Inc.