Transmission Disassembly - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

TRANSMISSION DISASSEMBLY

Refer to the exploded view at the end of this chapter as

a reference.

1. Place transmission in High gear before disassembly.

2. Drain and properly dispose of the transmission

lubricant (see Chapter 2).

3. Remove the bell crank nut (A) and bell crank (B).

4. Remove E-clip (C) that retains spring washer (D), flat

washer (D) and gear switch (E). Remove the switch.

5. Remove the sector cover bolts (F) and remove the

sector cover (G).

Removal can be aided by using your thumbs to press in

on the shafts while pulling out the cover with your

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

6. Remove the compression spring (H).

7. Remove the detent star (I). Note how the detent star

fits onto the splined shaft with the raised edge facing

outward for reassembly.

8. Remove the spacer (J).

9. Remove the shift shaft (K), detent pawl (L) and the

shift sector gears (M and N).

Note the timing marks on the shift gears (M and N) for

reassembly purposes.

10. Remove the O-rings (P) from each shaft and discard.

Use new O-rings upon assembly.

TRANSMISSION

Table of Contents