Servicing - No Differential; Transmission Disassembly - Polaris RZR 570 2013 Service Manual

TRANSMISSION

SERVICING - NO DIFFERENTIAL

TRANSMISSION DISASSEMBLY

Refer to the exploded view at the end of this chapter as
a reference.
1. Place the transmission in High gear before
disassembly.
2. Drain and properly dispose of the transmission
lubricant (see Chapter 2 – Transmission Lubrication,
page 2.25).
3. Remove the bellcrank nut (A) and bellcrank (B).
4. Remove the E-clip (C) that retains the spring washer
(D), flat washer (D) and gear switch (E). Remove the
switch.
5. Remove the sector cover bolts (F) and remove the
sector cover (G).
Removal can be aided by using your thumbs to press in
on the shafts while pulling out the cover with your
6.14
NOTE
NOTE
fingers.
6. Remove the compression spring (H).
7. Remove the detent star (I). Note how the detent star
fits onto the splined shaft with the raised edge facing
outward for reassembly.
8. Remove the spacer (J).
9. Remove the shift shaft (K), detent pawl (L) and the
shift sector gears (M and N).
Note the timing marks on the shift gears (M and N) for
reassembly purposes.
10. Remove the O-rings (P) from each shaft and discard.
Use new O-rings upon assembly.
9926813 R04 - 2013-2016 RZR 570 Service Manual
NOTE
© Copyright Polaris Industries Inc.