Polaris RZR PRO XP 2020 Service Manual page 179

8. If previously removed, install the two fasteners
retaining the fuel injector wiring bracket to the intake
manifold. Torque fasteners to specification.
TORQUE
Fuel Injector Wiring Bracket Fasteners:
7 ft-lb (10 Nm)
9. Connect the sensors, switches and injectors.
t
10. Connect three hinge clips
line.
11. Install zip ties retaining the wiring harness around the
wer
intake manifold .
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
12. Install both hoses
to the transmission vent
13. Install the exhaust pipe. See Exhaust Pipe Installation
14. Fill the coolant bottle.
15. Install the cargo box.
16. Run the vehicle for several minutes and check the
ENGINE / COOLING SYSTEM
q
going to the charge air cooler.
page 3.21.
coolant level. Refill as required.
3
3.35