◆
Configuring the Data Log Content
■
Set Monitor to Log
The procedure in this section shows how to set the monitor for which to log data.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
2.
Push
(Menu).
3.
Push
or
4.
Push
or
5.
Push
or
6.
Push
or
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
, push
to select [Diagnostic Tools], then push
to select [Data Logger], then push
to select [Log Monitor], then push
to select the save-destination monitor parameter, then push
(Back), and then push
.
(Setup).
.
6.6 Keypad Operation
to show [Home].
.
6
481