1.4 Replace Cooling Fans and Circulation Fans
1.
Unplug the fan cables from the fan connectors.
A - Fan connectors
B - Fan cables
2.
Loosen the screws that safety the circuit board cooling fan unit and slide the circuit board cooling fan unit up.
Note:
To remove the fan unit, it is only necessary to loosen the screws.
A - Screws
52
Figure 1.59 Unplug the Fan Cables
Figure 1.60 Slide the Circuit Board Cooling Fan Units
C - Circuit board cooling fan units
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting