*1
For Yaskawa PM motors (SMRA-series, SSR1-series, or SST4-series), set E5-01 (Motor Code). For PM motors from a different
manufacturer, set E5-01 = FFFF.
*2
Be sure to release the holding brake before doing Inertia Tuning.
*3
In ASR Tuning, the drive will automatically tune Feed Forward control and KEB Ride-Thru 2 parameters.
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
Figure 6.10 PM Motor Auto-Tuning and Test Run Procedure
6.4 Start-up Procedures
445
6